Do It Yourself Stone Sealing In Melbourne

Please Share

It is important to do stone sealing in Melbourne because natural stone is porous and therefore requires sealing to stop unwanted liquids penetrating the surface and causing damage. The weather in Melbourne can be from one extreme to the next, raining and cold in the morning, hot and sunny during the afternoon, then raining again in the evening.  So it is recommended that you get your stone surfaces sealed properly for, not only accidental spills but also the changing weather conditions that can affect your outdoor stone areas. 

stone sealing image

How to Do Stone Sealing At Home

You can definitely do stone sealing yourself, but like anything, it will be a learning curve. In Melbourne, there are professional stone sealing services available. So if you feel like you want professional help, you will be able to get it here. Otherwise, keep reading below to learn what is involved in sealing your stone surfaces. 

Step 1: Cleaning

Make sure you clean the area properly, get rid of all the dust, surface stains and other rubbish. This can get stuck into the sealant, causing the stone sealing to not be as effective as it could be. Cover any garden areas, so that the wind won’t blow it into the sealant while you are waiting for it to dry. 

Step 2: Sealing

Once you have completely cleaned up the stone surface area and protected all the gardens, it is time to put the sealant on. It is best to use what is called a penetrating sealer. This type of sealer will seep into the pores of the stone, rather than just stay on the surface. They also won’t change the look of the stone surface. Pour the sealer all over the surface, make sure that the entire stone is covered with the sealant. 

Step 3: Wait

Once you have put the sealant on, wait 10 to 20 minutes for it to penetrate into the stone. Penetrating sealers can be touch dry in about 5 hours, but it is recommended to wait at least 24 hours for the surface to e fully dry and cured. 

Step 4: Buffing

Now that the surface has been able to dry it is now ready to be finished. Use a buffer tool to remove any imperfections such as streaks and unevenness. This is the last step in the process of stone sealing.  You can now sweep away any excess sealer dust and dirt. Remove the garden protection and enjoy your newly sealed stone surface. 

Stone sealing can last for many many years, depending on how much use it gets. It is best to get the stone surface checked once a year because preventing damage is a lot more cost-effective than stone restoration and replacement.

 

 

Leave a Reply