Baby Cribs Safety Tips for Young Moms

Please Share

Dispose of antique baby cribs with decorative cutouts, corner posts, or lead paint. The space between the slats should be apart to prevent infants from getting their heads stuck between them. Cribs made after 1974 must satisfy this and other strict safety standards. The corner posts should be less than 1/16 of an inch greater than the panels or the exact same height as the finish panels.

No cutout areas on the headboard or footboard so a baby's head can't get trapped. The top rails of in their elevated position, crib sides, should be at least 26 inches above the surface of the mattress support in its lowest place.

The moment the child can pull himself to a standing position, set and keep the mattress. Once the height of the rails is less than three-fourths of their child's height, Quit using the crib.

Mattress

The mattress must fit snugly to the crib, so there is not any gap. If two adult fingers can be placed between the mattress and the crib, the mattress must be replaced. Don't use plastic packing materials, such as dry cleaning bags, as mattress covers. Plastic film can cling to children's faces and should never be in or near the crib.

Place your baby to sleep on his or her back or side in a crib with a firm, flat mattress, and no soft bedding underneath. Speak with your pediatrician about which sleeping position is best for your child.

Crib Hardware

The shed (s) of this crib should require two different actions or a minimum force of ten pounds with one action to release the fold or the locks to prevent accidental release by the child.

The crib hardware should be checked for disengaged, broken, bent, or lose bits. Checks should be made from the mattress support hangers and mounts in order that they cannot drop. The hardware and the crib ought to be smooth and free of sharp edges, points, and surfaces.

Crib Accessories

Bumper pads should pay for the entire perimeter of the crib and tie or snap in place. Bumper pads should have at least six ties or straps, and some surplus lengths of straps or ties ought to be cut off. Bumper pads should never be utilized in lieu of proper spacing between the pliers and ought to be removed from the crib when the child can pull himself into a standing posture.

Teething rails that are damaged should be fixed, replaced, or eliminated. To prevent possible entanglement, telephones and crib gyms, which are supposed to be hungover or across the crib, should be removed while the child is five months old or if he starts to push up on hands and knees or can pull himself up. Maintain the clear of vinyl sheets, cushions, and large stuffed animals or toys. These may empower kids to climb out of the crib or maybe suffocation dangers. Any vinyl or fabric items that are loose or torn should be replaced or repaired promptly.

Crib Environment

Do not place crib next. Drapery and blind cords pose an entanglement hazard, and window screens aren't intended to keep a kid in, only insects outside. Install smoke detectors. Follow the manufacturer's directions for positioning. Check at least once a month to be a certain battery, and the smoke detector is in great working condition.

If you are still undecided on what features to look for in a baby crib then check Cerro Reyes.

Leave a Reply